Place your order at

HUBBELL HBL2635 AC Flanged Inlet NEMA L7-30 Male White

HUBBELL HBL2635 AC Flanged Inlet NEMA L7-30 Male White

Documents [open in new window]

  1. Datasheet 1
  2. Datasheet 2
  3. COC

Additional documents may be available on request.


Amperage 30 Amp
Volts 277 Volts
Poles and Wires 2 Pole, 3 Wire Grounding
Configuration Type NEMA L7-30P
Terminal Retainer Material Clear Polycarbonate
Blade Material Brass
Terminal Clamp Material .08 in. (2) Steel Nickel Plated
Terminal Screw Material #10-32 Brass, Multiple Drive
Ground Screw Material #10-32 Brass, Multiple Drive
Flanged Casing Material Natural White Nylon
Mounting Screw Material Nickel-plated Brass Round head screws
Dielectric Voltage Withstand 2,000 Volt Minimum
Current Interrupting Certified for Current Interrupting at Full Rated Current
Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of .75
Terminal Accommodation #16 AWG to #8 AWG
Terminal Identification Terminals identified in accordance with UL 498 (X, Y, Z, White, Green)
Flammability HB or better per UL 94 or CSA 22.2 No. 0.6
Operating Temperature Maximum Continuous 75°C Minimum -40°C (without impact)
Certifications UL, CSA Listed.

Technical Notes

Male Twist-Lock Inlet is typically panel mounted on the piece of equipment receiving the power.

The flange provides convenient screws holes for mounting. Twist-Lock was invented by Hubbell and is a patented term. Locking connectors have the pins arrayed in a circular manner. The connector is inserted into the inlet and twisted to lock in place.

Related Items

Item: 4389

HUBBELL HBL2633 AC Connector NEMA L7-30 Female

Item: 9080

HUBBELL WP2 Weatherproof Lift Cover for Inlets/Outlets