|
| |
|
|
| |
|
|
|
|
|
0
Items
In Cart |
|
Total:
$0.00
|
| |
|
|
Place your order at www.stayonline.com
|
|
|
| |
|
|
Support Cord Wire Grips |
|
|
Service Drop Support Grips are used to hold the weight of electrical cable as it hangs in a vertical, sloping, or horizontal position. Cable must be supported , or its dead weight can cause excessive strain or pullout at the connections.
Important! Read all the breaking strength, safety and technical data listed on this page prior to installation. For Indoor Use Only.
Availability: Usually ships within 2 business days from NC. |
|
Single Eye Support Cord Grip |
| Cable Diameter Range |
Breaking Strength (Approx.) |
Eye Length |
Mesh Length |
.50 - .62 in.
(1.27 - 1.57 cm) |
530
(2,357 N) |
7 in.
(17.78 cm) |
10 in.
(25.40 cm) |
|
.63 - .74 in.
(1.60 - 1.88 cm) |
790
(3,514 N) |
8 in.
(20.32 cm) |
10 in.
(25.40 cm) |
|
.75 - .99 in.
(1.90 - 2.51 cm) |
1020
(4,537 N) |
8 in.
(20.32 cm) |
13 in.
(33.02 cm) |
|
1.00 - 1.24 in.
(2.54 - 3.15 cm) |
1610
(7,161 N) |
9 in.
(22.86 cm) |
14 in.
(35.56 cm) |
|
1.25 - 1.49 in.
(3.17 - 3.78 cm) |
1610
(7,161 N) |
10 in.
(25.40 cm) |
15 in.
(38.10 cm) |
|
1.50 - 1.74 in.
(3.81 - 4.42 cm) |
1610
(7,161 N) |
12 in.
(30.48 cm) |
17 in.
(43.18 cm) |
|
1.75 - 1.99 in.
(4.44 - 5.05 cm) |
2150
(9,563 N) |
14 in.
(35.56 cm) |
19 in.
(48.26 cm) |
|
2.00 - 2.49 in.
(5.08 - 6.32 cm) |
3260
(14,500 N) |
16 in.
(40.64 cm) |
21 in.
(53.34 cm) |
|
2.50 - 2.99 in.
(6.35 - 7.59 cm) |
3260
(14,500 N) |
18 in.
(45.72 cm) |
23 in.
(58.42 cm) |
|
3.00 - 3.49 in.
(7.62 - 8.86 cm) |
4900
(21,795 N) |
21 in.
(53.34 cm) |
25 in.
(63.50 cm) |
|
3.50 - 3.99 in.
(8.89 - 10.13 cm) |
4900
(21,795 N) |
24 in.
(60.96 cm) |
27 in.
(68.58 cm) |
|
|
|
|
Service Drop Support Grips are used to hold the weight of electrical cable as it hangs in a vertical, sloping, or horizontal position. Cable must be supported , or its dead weight can cause excessive strain or pullout at the connections.
Important! Read all the breaking strength, safety and technical data listed on this page prior to installation. For Indoor Use Only.
Availability: Usually ships within 2 business days from NC. |
|
Double Eye Support Cord Grip |
| Cable Diameter Range |
Breaking Strength (Approx.) |
Eye Length |
Mesh Length |
.75 - .99 in.
(1.90 - 2.51 cm) |
2820 lbs
(12,543 N) |
10 in.
(25.40 cm) |
25 in.
(63.50 cm) |
|
1.00 - 1.24 in.
(2.54 - 3.15 cm) |
4280 lbs
(19,037 N) |
10 in.
(25.40 cm) |
28 in.
(71.12 cm) |
|
1.25 - 1.49 in.
(3.17 - 3.78 cm) |
4280 lbs
(19,037 N) |
10 in.
(25.40 cm) |
30 in.
(76.20 cm) |
|
1.50 - 1.99 in.
(3.81 - 5.05 cm) |
4280 lbs
(19,037 N) |
10 in.
(25.40 cm) |
34 in.
(86.36 cm) |
|
2.00 - 2.49 in.
(5.08 - 6.32 cm) |
8050 lbs
(35,806 N) |
12 in.
(30.48 cm) |
36 in.
(91.44 cm) |
|
2.50 - 2.99 in.
(6.35 - 7.59 cm) |
8050 lbs
(35,806 N) |
12 in.
(30.48 cm) |
38 in.
(96.52 cm) |
|
3.00 - 3.49 in.
(7.62 - 8.86 cm) |
10,060 lbs
(44,747 N) |
12 in.
(30.48 cm) |
40 in.
(101.62 cm) |
|
3.50 - 3.99 in.
(8.89 - 10.13 cm) |
12,070 lbs
(53,687 N) |
12 in.
(30.48 cm) |
44 in.
(111.76 cm) |
|
4.00 - 4.49 in.
(10.16 - 11.40 cm) |
12,070 lbs
(53,687 N) |
12 in.
(30.48 cm) |
46 in.
(116.84 cm) |
|
4.50 - 4.99 in.
(11.43 - 12.67 cm) |
12,070 lbs
(53,687 N) |
12 in.
(30.48 cm) |
68 in.
(172.72 cm) |
|
|
|
|
| |
| |
|
Important Safety Information:Kellems Support Grips are used to hold the weight of electrical cable as it hangs in a vertical, sloping or horizontal position. Electrical cable must be supported, or its dead weight can cause excessive strain or pullout at the connections resulting in power failure. Support grips also absorb additional strain from flexure, vibration, expansion and contraction. Kellems Support Grips are made of high grade, non-magnetic tin-coated bronze strand. Indoor use only.
Caution: It is very important to comply with all of the following precautions.
- Support grips are to be installed by a qualified individual in accordance with all applicable national and local safety, electrical and rigging codes.
- Ensure that the correct grip is selected for your specific needs.
- Do not use a support grip for any application other than supporting cable.
- Thoroughly examine the grip for damage. Do not use a damaged grip.
- Ensure that the recommended work load of the grip is suitable for the application. Never use grips at their approximated rated breaking strength. A safety factor of 10 is recommended for support grips.
- Do not alter grips in any way. For example, do not flatten, straighten, bend or otherwise modify eye tubes, hooks, links or strand equalizers.
- Do not attach any type of hook, clamp or other hardware directly to the stranded bale of a "U" eye support grip. the formed eye tube is the only acceptable means of attachment to external hardware.
- Always apply 2 bands at 1 in. and 2 in. respectively, from the tail end of the mesh to guard against accidental release of the grip. Accidental release can occur if an object contracts and pushes against the tail end of the mesh, thereby expanding and releasing its hold.
|
|
|
|
|
|