|
| |
|
|
| |
|
|
|
|
|
0
Items
In Cart |
|
Total:
$0.00
|
| |
|
|
Place your order at www.stayonline.com
|
|
|
| |
|
|
|
|
|
|
Hubbell Underground Pulling Grips
High strength galvanized steel underground pulling wire grips handle longer, heavier pulling jobs. They are safe, rugged and a dependable economical solution for underground pulls. Easily installed and removed.
Important! Read all the breaking strength, safety and technical data listed on this page prior to installation. Availability: Usually ships within 2 business days from NC. |
| Hubbell Underground Grip |
Hubbell Underground Grips |
| Cable Diameter Range |
Breaking Strength (Approx.) |
Eye Length |
Mesh Length |
Click on the item # for detailed specifications. |
.50 - .61 in.
(1.27 - 1.55 cm) |
5,600 lbs.
(24,909 N) |
5 in.*
(12.70 cm) |
16 in.
(40.64 cm) |
|
.62 - .74 in.
(1.57 - 1.88 cm) |
6,800 lbs.
(30,246 N) |
5 in.*
(12.70 cm) |
16 in.
(40.64 cm) |
|
.75 - .99 in.
(1.90 - 2.51 cm) |
9,600 lbs.
(42,701 N) |
6 in.**
(15.24 cm) |
32 in.
(81.28 cm) |
|
1.00 - 1.49 in.
(2.54 - 3.78 cm) |
16,400 lbs.
(72,947 N) |
7 in.+
(17.78 cm) |
33 in.
(83.82 cm) |
|
1.50 - 1.99 in.
(3.81 - 5.05 cm) |
16,400 lbs.
(72,947 N) |
7 in.+
(17.78 cm) |
34 in.
(86.36 cm) |
|
2.00 - 2.49 in.
(5.08 - 6.32 cm) |
27,200 lbs.
(120,986 N) |
9 in.++
(22.86 cm) |
36 in.
(91.44 cm) |
|
2.50 - 2.99 in.
(6.35 - 7.59 cm) |
33,000 lbs.
(146,784 N) |
10 in.^
(25.40) |
38 in.
(96.52 cm) |
|
3.00 - 3.49 in.
(7.62 - 8.86 cm) |
41,000 lbs.
(182,368 N) |
10 in.^
(25.40) |
39 in.
(99.06 cm) |
|
3.50 - 3.99 in.
(8.89 - 10.13 cm) |
48,000 lbs.
(213,504 N) |
10 in.^
(25.40) |
41 in.
(104.14 cm) |
|
|
|
*Rotating Eye Diameter 7/8 in. (2.22 cm)
**Rotating Eye Diameter 1 in. (2.54 cm)
+Rotating Eye Diameter 1 3/8 in. (3.49 cm)
++Rotating Eye Diameter 1 5/8 in. (4.13 cm)
^Rotating Eye Diameter 1 7/8 in. (4.76 cm) |
|
|
|
Important Safety Information:Caution: It is very important to comply with all of the following precautions. Failure to do so may result in property damage, personal injury or death.
- Pulling grips are to be installed by a qualified individual in accordance with all national and local safety, electrical and rigging codes.
- Ensure that the correct grip is selected for your specific needs.
- Do not use a pulling grip for any application other than pulling cable.
- Thoroughly examine the grip for damage. Do not use a damaged grip.
- Ensure that the recommended work load of the grip is suitable for the application. Never use grips at their approximated breaking strength. A safety factor of 5 is recommended for pulling grips.
- Do not alter grips in any way. for example, do not modify pulling eyes, shoulders, fittings or lugs.
- Do not attach any type of pulling hardware to any point on the grip other than the pulling eye. the pulling eye is the only acceptable means of attachment to external hardware.
- Always apply 2 bands at 1" and 2" respectively, from the tail end of the mesh to guard against accidental release of the grip. Accidental release can occur if an object contracts and pushes against the tail end of the mesh, thereby expanding and releasing its hold.
|
|
| [old view] |
| |
|
|
|